MTP U R Series |
|
Video |
Gain |
Unity |
|
Video input |
Number/signal type |
1 set of proprietary analog signals |
Connectors |
1 female RJ-45 |
|
Video output |
Number/signal type |
1 RGBHV, RGBS, component video (bi-level and tri-level), S-video, composite video (follows input type) |
Connectors |
|
MTP U R RSA SEQ, MTP C7 U R RSA SEQ |
1 female 15-pin HD for RGB
3 female BNC for Y, R-Y, B-Y
1 female 4-pin mini DIN for S-video (Y/C)
1 female BNC for composite video |
All other models |
1 female 15-pin HD for RGB or Y, R-Y, B-Y
1 female 4-pin mini DIN for S-video (Y/C)
1 female BNC for composite video |
Nominal level |
1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video |
Minimum/maximum levels |
0.8 V to 1.2 Vp-p |
Impedance |
75 ohms (during video output only) |
Return loss |
<-30 dB @ 5 MHz (during video output only) |
DC offset |
<±20 mV with input at 0 offset |
Skew compensation |
62 ns |
Maximum resolution |
Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600' |
NOTE |
Refer to the user's guide for the maximum distances recommended for specific resolutions. |
|
|
Sync |
Output type |
RGBHV, RGBS |
Standards |
NTSC 3.58, NTSC 4.43, PAL, SECAM |
Output level |
4.0 V to 5.0 Vp-p, unterminated |
Output impedance |
87 ohms (24 mA) |
Polarity |
Positive or negative (selectable) |
|
Audio — MTP U R RSA SEQ, MTP U R A, MTP C7 U R RSA SEQ |
Gain |
Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response |
20 Hz to 20 kHz, ±1 dB |
THD + Noise |
0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level |
S/N |
>70 dB at maximum output (unweighted) |
|
Audio input — MTP U R RSA SEQ, MTP U R A, MTP C7 U R RSA SEQ — See MTP Series transmitters' audio output specifications |
Number/signal type |
1 set of proprietary analog signals |
Connectors |
1 female RJ-45 |
NOTE |
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu |
|
|
Audio output — MTP U R RSA SEQ, MTP U R A, MTP C7 U R RSA SEQ |
Number/signal type |
2 mono, balanced/unbalanced |
Connectors |
(1) 3.5 mm captive screw connector, 5 pole |
Impedance |
50 ohms unbalanced, 100 ohms balanced |
Gain error |
±1 dB channel to channel |
|
Control/remote — external device (pass-through, unidirectional or bidirectional) (RS and RSA models) |
Serial control port input/output |
RS-232 via (1) 3.5 mm, 3 pole captive screw connector |
Baud rates |
Up to 38400 bps at up to 600' (183 m) |
NOTE |
Higher data rates and distances are possible. Performance varies based on baud rate and cable length. |
|
Protocol |
Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none |
NOTE |
Protocol is mirrored between the transmitter and the receiver. |
|
Serial control pin configuration |
Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND |
|
General |
Recommended cable type |
|
MTP C7 U R RSA SEQ |
CAT 7 (shielded) or Extron STP201 |
All other models |
CAT 5/5e/6 (shielded or unshielded) |
NOTE |
Shielded twisted pair cable provides added protection from outside interference and increases overall signal transmission distance. Extron strongly recommends using shielded twisted pair for optimal performance. |
|
Power supply |
External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1 A, 12 watts |
Power input requirements |
12 VDC, 0.5 A |
Temperature/humidity |
Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing |
Cooling |
Convection, vents on top and sides |
Mounting |
Rack mount |
Yes, with optional 1U rack shelf |
Furniture mount |
Yes, with optional mini under-desk mounting kit |
Pole mount |
Yes, with optional pole mounting kit |
Enclosure type |
Metal |
Enclosure dimensions |
1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.) |
Product weight |
0.6 lbs (0.3 kg) |
Shipping weight |
2 lbs (1 kg) |
Vibration |
ISTA 1A in carton (International Safe Transit Association) |
Regulatory compliance |
|
Safety |
CE, c-UL, UL |
EMI/EMC |
CE, C-tick, FCC Class A, ICES, VCCI |
Warranty |
3 years parts and labor |